Yi Ligao HPA High Performance Acrylic conformal coating PCB board to enhance the protective performance by UL, MIL and IPC-CC-830 certified solvent-based and solvent-based conformal coating acrylic, silicone, polyurethane and water-based UV-curable UV Check the lamp can be diluted, masquerading three anti-paint is used to protect printed circuit boards and related equipment from the effects of the production environment. Three anti-paint coating thickness is usually after curing 25-75μm, these coatings '' attached '' to the circuit board, the protection and coverage are very good, to extend the working life of the printed circuit board. Acrylic paint three anti-HPA Products flexible, quick-drying, transparent acrylic conformal coating for the protection of electronic circuitry to meet the highest protection and aerospace requirements. Features? To a variety of substrates with excellent adhesion? Fluoresce under ultraviolet light, easy to check? Wide operating temperature range? Can penetration without generating toxic gases (excluding isocyanates)? Non-corrosive cadmium, zinc plate ( ? free phenol) prevents the growth of mold cured film available Electrolube Ultrasolve (ULS) Clear excellent insulation certification:?? MIL Approval (MIL-1-46058C): By GJB150.10-86 by GJB4.10- 1983 by RoHS Compliant (2002/95 / EC): is IPC-CC-830 standard NATO Num 6850992608540 (HPA200H) liquid properties: Appearance: light yellow liquid specific gravity (density) @ 20 ° C: 0.91 (drums); 0.78 (aerosol) g / ml VOC content: 65% (barrels); 75% (aerosol) Flash point: -7 ° C (drums); - 4 ° C (aerosol) solid content: 35 % (barrels); 15% (aerosol) Viscosity @ 20 ° C: 300 - 350 cPs (barrels) Touch dry: 10 - 15mins recommended drying time: 24 hrs @ 20 ° C 4hrs @ 60 ° C 2hrs @ 90 ° C coated area @ 25μm: 14 m2 / L (drums); 2.4 m2 (200ml aerosol) Dry film properties: color: colorless working temperature range: -55 ° C- + 130 ° C Flammability: self-extinguishing (ASTM Method D56) Thermal Cycling (MIL-1-46058C): through expansion coefficient: 130ppm Dielectric Strength: 45 kV / mm dielectric constant: 2.5 Insulation resistance: 1 x 1015 Ohms / cm (DEF-STAN 59/47 ) Comparative Tracking Index:> 300 V Dissipation factor @ 1MHz @ 25 ° C: 0.01 moisture resistant (MIL-1-46058C): By Packaging Description Order HPA shelf life of three anti-paint 200ml aerosol HPA200H 36 months 1L bucket loading HPA01L 48 months 5L barrels HPA05L 48 months 5L barrels HPA05LT 48 months universal acrylic thinner 5L bottled UAT05L 72 months to remove the solvent 200 ml aerosol ULS200D 36 months 400 ml aerosol ULS400D 36 months 1L Bottled ULS01L 72 months