Brand Model: Dow Corning SE-4450 Packing: 1kg / cans Color: Grey Shelf Life: 18 months Storage Environment Description: room temperature, a cool place to preserve Remarks: Features: Dow Corning SE4450 1KG / tank thermal insulation, elastomer, then used, heat-curing, color: gray, mix whole ratio: single liquid product characteristics: high fever spread resistance, excellent adhesion, thermal consider 1.88W / mk, Packing: 1kg / cans, 330ml name: specialized high heat pipe thermal plastic SE4420, SE4450; Model: SE4450, SE4420; Brand: Dow Corning (Dow Corning); Origin: Japan; Product Description: insulation, thermal (thermal conductivity) Advantages 1. Good thermal conductivity bonding strength 2. 3. Curing time 4. Short high and low temperature (-60 ~ -250oC Parameters: Performance: SE4450 Gravity: 2.7 Hardness: (JIS A) 85 Tensile strength 50Kgf / cm2 Elongation 30% dielectric strength: 25KV / mm Volume Resistivity2 x 1014 Ω cm bonding strength (aluminum): 30Kgf / cm2 heat transfer coefficient: 4.5x10-3 cal / cm.sec.oC recognized standards: SGS, UL, MSDS DOW CORNING SE4450 Uses: This material provides a large amount of heat and electronic equipment the need to control the curing rate of the occasion, such as: power supply, ink jet print head, trip computer (ECU), driver IC and heat sink bonding, etc., has excellent thermal conductivity and heat transfer effect, grease-like paste, high-resistant products low temperature -50C - + 200C use: Pretreatment: degrease the substrate surface to be cleaned and dried, if corona treatment can increase the bonding effect sizing: artificial pressure or pneumatic pressure type caulking gun It can be applied to curing: The product heat curing, after sizing recommend heating the oven to 150 ℃ cured Storage: The product must be refrigerated.