Suitable for short-term or long-term exposure to low temperatures in the sliding parts, electronic equipment connecting portion, precision engineering instruments and optical equipment, such as in cold climates or equipment used in the freezer. Also suitable for high-speed operation of the antifriction bearing, such as: spindle bearings, textile machinery, measuring equipment, control equipment electric motor. OKS 416- Product Information Applications: o suitable for short-term or long-term exposure to low temperature sliding member in the environment, electronic equipment connecting portion, precision engineering and optical equipment, instruments, equipment or freezer as used in cold climates. Also suitable for high-speed operation of the antifriction bearing, such as: spindle bearings, textile machinery, measuring equipment, control equipment electric motor. Advantages: o for the cold and high-speed operation of the environment, reduce the mechanical operation of the noise, lubrication lasting effect. o unique formula, lubricating effect is obvious, less wear and tear, economic benefit. o strong antioxidant, anti-cold, hot water. Usage: o In order to obtain the best results, you should carefully clean the lubrication point, you can use like OKS 2610 OKS 2611 Universal Cleaner. o In the first paragraph before filling, should be removed on the corrosion protection. Filled with grease to bearing up to ensure that all work surfaces have been painted to. For ordinary bearing cavity space is filled 1/3, for fast bearings (DN value greater than 400, 000) into the cavity space is filled 1/4, low-speed bearings (DN value of less than 5, 000) his chamber to be completely filled full. Proposal should comply with the instructions of the bearing and machine manufacturer. o re-lubrication may be injected with the greasing or automatic lubrication systems grease from the mouth. Determine the frequency and amount of lubrication according to operating conditions. If the old grease is not completely removed, it can be appropriate to limit the amount of grease is injected in order to avoid excess lubrication of the bearing. If re-lubrication interval is longer, you should consider replacing all of the grease. o The product can be mixed with a suitable lubricant. For other questions, please contact our technical department. Working temperature: -50 ℃ - + 120 ℃. Appearance: Yellow